Door closers, pivots and locks

B&B Locksmiths supplies, fits, repairs and adjusts door closers, pivots, locks and associated door hardware for timber, metal, aluminium and suitable glass doors throughout Oxford and Oxfordshire. We work on domestic, commercial and communal doors, including those fitted in offices, shops, blocks of flats, schools, shared entrances and public buildings.

Door closers, pivots, locks, handles, keeps and frames must work together correctly if a door is to open, close, latch and lock securely. Wear, damage or misalignment in one part of the door system can affect the operation of other components, causing the door to slam, drag, fail to close or latch properly, or become difficult to secure.

Door Closer Repairs and Adjustments

A door closer controls how the door returns to its closed position, including the main closing action and the final movement needed to engage the latch. Correct adjustment depends on the closer, door and installation involved.

Door closers are commonly fitted to commercial doors, communal entrances, fire doors, offices, shops, schools, blocks of flats and other frequently used shared-access doors.

Common Door Closer Problems

A door closer may require adjustment, repair or replacement if:

The door slams shut
The door closes too slowly
The door does not close fully
The door fails to latch
The closer is leaking oil
The fixings have become loose
The closer arm is worn or damaged
The closing or latching speed is incorrectly adjusted
The door is difficult to open or does not move smoothly
The door remains partly open after use
The closer makes unusual noises during operation

We can assess the closer, its fixings and arm, the door alignment, latch and associated hardware before recommending adjustment, repair or replacement. If hydraulic fluid has leaked or an internal component has failed, adjustment alone may not resolve the fault.

The closer must also be suitable for the door’s size, weight, construction, location and expected frequency of use. Where relevant accessibility requirements apply, the effort required to open the door should also be considered while ensuring that any required self-closing action remains effective.

On a fire-resisting door required to self-close, the closer must allow the door to return fully into the frame and engage the latch reliably. Problems with the closer, hinges, alignment, seals, latch or contact with the floor can prevent this from happening.

Any replacement closer or associated hardware fitted to a fire-resisting doorset must be suitable for its intended use and must not compromise the required operation or fire performance of the doorset.

Door Pivot, Floor Spring and Transom Closer Repairs

Door pivots allow certain doors, including some glass, aluminium and commercial doors, to swing from pivot points rather than conventional hinges. If a pivot becomes worn, loose or misaligned, the door may drop, scrape against the floor, rub against the frame, fail to close properly or become difficult to lock.

Depending on the door system, the problem may involve the top centre or pivot, bottom pivot, floor spring, transom closer, drive arm, concealed closer or associated fixings. Correct identification of the door system and compatible replacement components is important before repairs are undertaken.

A worn, leaking or incorrectly adjusted floor spring, transom closer or concealed closer can affect the door's movement, alignment, closing action and ability to latch. Depending on the system, the door may need to be safely removed before concealed components can be properly inspected or replaced.

Commercial and Communal Door Lock Repairs

Door locks must work correctly with the closer, pivots, handles, keeps and frame. If the door has dropped or does not close correctly, the lock or latch may no longer align with the keep, making the door difficult to latch, lock or unlock.

Correcting the lock or keep alone may not provide a lasting repair if the underlying problem is caused by door movement, worn pivots, loose fixings or another alignment fault. We assess the cause of the problem before recommending the appropriate repair, adjustment or replacement.

Door Closer, Pivot and Lock Services

B&B Locksmiths can assess the door, closer, pivots, lock, handles, keeps and frame to identify the cause of the problem. Where practical and appropriate, we repair or adjust existing components rather than replacing them unnecessarily.

Our services can include:

Door closer fitting, adjustment and replacement
Overhead and concealed door closer repairs
Floor spring and transom closer repairs
Top and bottom pivot repairs
Dropped door and alignment correction
Communal and commercial door lock repairs
Latch, keep, handle and associated hardware adjustments

Where work involves a fire-resisting door, communal entrance or door forming part of an escape route, the required closing action, means of escape, ease of operation and suitability of the hardware must also be considered.

If you need door closer fitting, door closer repairs or adjustments, pivot repairs, floor spring or transom closer repairs, communal door repairs or commercial door lock repairs in Oxford or Oxfordshire, contact B&B Locksmiths for clear, practical advice, professional fitting and repairs, and reliable local service.